Navigate

Rider Spotlight

Over the next few months we are going to be featuring a rider of the month. The riders will be voted on by the TTR crew and will be from all genre's of motorcycling.

Welcome To TTRMotorsports

TTRMotorsports carry's all of the leading brands of suspension products such as Traxxion Dynamics, Sachs, Penske, Race-Tech, Fox, and Ohlins Products. We have all the special tooling and parts to ensure that when we service your products it is in the most professional manner possible. Our customers have counted on TTRMotorsports to ensure their performance products work as designed.

About the products

The Standard Fork Service is designed as a quality service option for customers with stock forks or aftermarket upgraded forks that have less than 25 hours of total racing on or off road operation. The Pro Road race Fork Service is designed for Traxxion, Race-Tech, Ohlins, etc. upgraded fork products or Showa/Ohlins/Kayaba OEM forks. The Pro Road race Fork Service replaces all critical components that wear out after 25 hours of hard use. The Standard Shock Service is designed for Penske, Ohlins, Fox, and OEM shocks that have less than 25 hours of total racing operation. The Pro Road race Shock Service is designed for Shocks that have over 25 hours of operation and addresses replacement of the shim stack as shims become fatigued after this amount of operation. All of these products have been created through common observed failures within OEM products TTRMotorsports has sold and serviced.

Standard Fork Service ($125.00)	Pro Road Race Fork Service ($225.00)	Standard Shock Service ($125.00)	Pro Road Race Shock Service ($175.00)
Disassemble Forks (except cartridge)	Completely Disassemble Forks	Completely Disassemble Shock	Completely Disassemble Shock
Inspect Bushings	Inspect Bushings	Polish main shaft	Polish main shaft
Roll-Out forks (check straightness)	Roll-Out Forks	Inspect main bearing bushing	Inspect main bearing bushing
Flush Cartridge	Disassemble Cartridge	Turn/Replace Base Shims	Replace Shims
Clean/Remove Sludge	Replace Check Plate	Polish/Face Piston (non anodized)	Polish/Face Piston (non-anodized)
Replace Fork Seals	Polish/Face Piston	Flush Rebound Circuit	Disassemble Rebound Circuit
Polish fork tubes (Cross-Hatch)	Replace C/P Wave Washer	Inspect Piston Band	Inspect rebound components
Reassemble	Replace Shims on Shim Stack	Inspect Floating Piston/O-Ring	Inspect Floating Piston/O-Ring
	Inspect Cartridge Bushing	Reassemble	Reassemble
	Inspect Rebound Piston Bushing	Charge Nitrogen Chamber	Charge Nitrogen Chamber
	Inspect Compression Piston O-Ring
	Reassemble Cartridge
	Inspect Bushings
	Clean/Remove Sludge
	Replace Forks Seals
	Polish fork tubes (Cross-Hatch)
	Reassemble

TTRMotorsports

Honda crf250x

news